Landscape Lighting Repair – How to Keep Your Lights in Peak Condition

Landscape lighting is an excellent way to highlight your property’s best features and enhance your outdoor living spaces. Keeping up with regular maintenance and addressing simple problems quickly can keep your lights in peak condition for years to come.


Remember to always turn off the power before examining or working on a light fixture. This will protect you from dangerous electrical wiring issues. Keep reading the article below to learn more about Landscape Lighting Repair Orlando.

Landscape lighting relies on wire connections to deliver a safe voltage from the transformer to each fixture. If these connections are loose, or even just slightly off, it can cause problems. Fortunately, these issues can be easily diagnosed and resolved without digging wire or dismantling light fixtures. The first step is always to turn off the power. This is a good habit to get into with any electrical project, and it’s especially important when working with low voltage wiring. You can do this by either turning off the transformer or switching off the circuit at the fuse box.

After the power is off, start by examining the transformer’s front panel to determine whether any connections are loose or disconnected. If so, they can be tightened with a screwdriver. If you suspect the problem is in the line between the transformer and the lights, you can check the total wattage of the lights and the wattage of the transformer using a voltmeter to see if it’s exceeding the maximum capacity of the system.

The next step is to trace the wire to find the source of the problem. You can do this by hooking up a test light to the power supply and following it around to see which lights illuminate. This can help you locate a short or cut in the line. The last step is to repair the connection. To do this, you’ll need to use a wire stripper on the cut end of the wire, says HeiSolar. Be careful not to damage the copper wire, and be sure to replace the insulation.

It’s also important to routinely inspect all the lighting fixtures in the system. Check the fixtures for signs of water ingress, such as rust and corrosion, as well as dirt and dust. The lenses should be clean of mineral deposits and cobwebs, which can diminish the quality of the illumination. The fixture housing should also be free of debris and moisture, which can prevent the proper operation of electrical components.

It’s also a good idea to periodically reevaluate and adjust your lighting design based on changes in the landscape or living spaces. This will allow you to highlight new features of the property and maintain its ambiance. And if you’re planning for future expansion, leave space in the initial design to accommodate additional lighting fixtures and components.


A landscape lighting system relies on fixtures and lamps to provide its light output. These are also susceptible to lots of environmental factors, including exposure to sunlight and moisture. The good news is that high-quality, professional grade copper or brass fixtures tend to weather well. Nevertheless, they are not impervious to damage and need to be repaired as necessary.

A common problem is a fixture that isn’t illuminating as it should be. This could be caused by a burned-out bulb, an electrical issue or a broken fixture. In some cases, the solution may be as simple as replacing the bulb. In other cases, the cause is more serious and requires a repair.

Another common problem is water inside a fixture or a bad connection. If a fixture is leaking, it can be fixed by removing the fixture and cleaning the inside and outside of the fixture as well as the wiring and re-sealing it. Corrosion on wire connections or on a fixture’s bulb contact points can be repaired by rubbing them with emery board or sandpaper to remove any corrosion and cleaning with a light touch of cleaner.

Regular visual inspections of your landscape lighting system can catch problems before they become too serious. If you see visible damage, a fixture that isn’t working or signs of other issues, it’s time to call for a landscape lighting repair.

Some repair tasks are relatively simple and can be done by the homeowner, such as resetting a circuit breaker or changing a lamp. Other advanced repairs, such as replacing parts or rewiring the transformer, are best left to a licensed electrician.

Proper placement of landscape lighting fixtures is important for both a functional and aesthetically pleasing design. It’s also a good idea to regularly reevaluate and adjust your lighting design in response to changes in your outdoor living spaces, landscape or architecture.


Lighting controls allow homeowners to manage a landscape lighting system in a safe and effective manner. This includes addressing upkeep issues that may impact the efficiency and effectiveness of a landscape lighting system.

For example, an aesthetically pleasing design requires the proper placement and positioning of landscape lights. A working light that is not positioned properly will look out of place, even though the fixture and equipment are in good condition.

It is also important for electrical professionals who specialize in lighting systems to remain up-to-date on the latest landscape lighting control technologies. This allows them to offer the highest value possible to their clients.

For instance, many new lighting controls are wireless. This makes it easier for property owners to monitor their landscape lighting system from a mobile device. This helps them stay on top of maintenance tasks and respond to problems quickly. It also gives them the ability to make changes on the fly, which can enhance a lighting design and increase functionality.

In addition to these control advancements, many lighting professionals are focusing on the integration of smart technology into their landscape lighting systems. This allows for greater automation and customization of lighting settings and can help reduce energy usage by allowing a home owner to schedule lighting activations.

Ultimately, landscape lighting provides beauty, safety, security, and continued outdoor enjoyment after dark. With a little proactive care and upkeep, it can continue to perform these functions for the lifetime of a homeowner’s home.


A well-installed landscape lighting system should look good and work properly. But problems can develop over time due to improper installation or lack of maintenance. Some issues include poor wire connections, use of wire that is not rated for outdoor use, incorrect voltage drop calculations, and places where the wiring runs over roots, rocks, or other structures where it may be damaged.

Often the most frustrating problem with a landscape lighting system is when fixtures keep burning out. A good place to start is by examining the internal components of the fixture. Most lights have a socket that the bulb plugs into. The socket needs to be dry to prevent moisture from ruining the fixture and electrical connections. If you see signs of water in the socket, a simple solution is to replace the gasket.

Leaking fixtures can be a sign of corrosion on the internal electrical components or poor design and engineering. A light that leaks can damage the fixtures, corrode the socket and wire connections, or create a fire hazard.

Corrosion is also a common problem with landscape lighting. The constant exposure to the elements causes corrosion in wire connections, and on the bulb contacts. When this occurs, it can cause the light to not turn on, or it can be difficult to get the bulb to come out of the socket. This can be remedied by using an emery board or sandpaper to clean off the corrosion, and then spraying it with contact cleaner before reinstalling the bulb.

While it is possible to repair your landscape lighting, sometimes it makes more sense to invest in a replacement. Lighting technology has come a long way in recent years, and you may be wasting your money by trying to repair a system that is too old.

A professional from a Memphis landscape lighting company can help you make the best decision for your home and yard. They can provide you with a detailed estimate and expert installation to ensure your landscape lighting system adds beauty, safety, and value to your home.